Dell EMC PowerEdge R620 Owner's Manual page 124

Error Code Message Information
Action
PST0129
Message
LCD Message
Details
Action
PSU0001
Message
LCD Message
Action
PSU0002
Message
LCD Message
Details
Action
PSU0003
Message
LCD Message
Details
Action
PSU0006
Message
LCD Message
Details
Action
PSU0016
Message
LCD Message
Details
Action
124 System messages
Re-seat the memory modules. If the issue persists, see
Memory is detected, but is not configurable.
Memory is detected, but is not configurable. Check memory devices.
System BIOS detected memory, but was unable to configure the memory for system
operation.
Compare system memory installation to supported system memory configurations.
Power supply <number> failed.
PSU <number> failed. Check PSU.
Remove and reinstall the power supply. If the issue persists, see
A predictive failure detected on power supply <number>.
Predictive failure on PSU <number>. Check PSU.
System performance and power redundancy may be degraded or lost.
Remove and reinstall the power supply at the next service window. If the issue persists,
see Getting Help.
The power input for power supply <number> is lost.
Power input for PSU <number> is lost. Check PSU cables.
The power supply is installed correctly but an input source is not connected or is not
functional.
Verify the input source is attached to the power supply. Verify the input power is within
the operating requirements for the power supply.
Power supply <number> type mismatch.
Power supply <number> is incorrectly configured. Check PSU.
Power supplies should be of the same input type and power rating.
Install matched power supplies and review proper configuration in this manual.
Power supply <number> is absent.
PSU <number> is absent. Check PSU.
The power supply has been removed or has failed.
1 Remove and reinstall the power supply.
2 Check cables and subsystem components in the system for damage.
3 If the issue persists, see
Getting
Getting Help.
Help.
Getting Help.