Coolant - Rotax 125 MAX DD2 evo Installation Instructions And Operators Manual

Use only distilled water as engine coolant. If the kart is stored below the freezing tempera-
ture of water, make sure to drain the water from the cooling radiator and engine
completely.
Storage below the freezing temperature of water could lead to a damage of the cooling
______________________________________________________
2
Page 2
Edition: September 01 2019
Operators Manual

COOLANT

Step Procedure
1
Open radiator cap and fill the system with coolant.
Small radiator: approx. 0.52 liter / 0.137 gal for the complete cooling system
Big radiator: approx. 0.7 liter / 0.185 gal for the complete cooling system
2 Close radiator cap.
Exceeding the engine temperature could lead to serious engine failure.
The engine temperature should not exceed 85 °C / 185 °F.
BRP-Rotax
ATTENTION
Observe the storage conditions.
system and the engine.
ATTENTION
Effectivity: 125 MAX DD2 evo