Rotax 125 MAX DD2 evo Installation Instructions And Operators Manual page 53

Figure 7.13
Shift contact
1
guidance
Procedure
Step
5 Mount Allen screw (pos. 1), lock wash-
er (pos. 2) and spacer (pos. 3) togeth-
er with the shift contact guidance (pos.
4) to the engine housing. Tightening
torque 22 Nm.
Figure 7.14
1 Allen screw
Spacer
3
Step Procedure
6 The alignment between point -1- and
point -2- must be given. Otherwise it
can cause increased friction, which
has a negative impact on shifting
behavior.
6
Page 8
Edition: September 01 2019
BRP-Rotax
INSTALLATION MANUAL
Retaining plate
2
2
Lock washer
4 Shift contact guidance
Figure 7.15
1 Point 1
Procedure
Step
7 Mount sleeve (pos. 1) onto the retain-
ing plate (pos. 2).
Figure 7.16
1 Mount sleeve
Step Procedure
8 Mount second Bowden cable (pos. 1)
through shift contact guidance and
sleeve onto the retaining plate (pos.
2).
No washer is necessary on this Bow-
den cable.
2
Point 2
Retaining plate
2
Effectivity: 125 MAX DD2 evo