Fitting Of The Spark Plug - Rotax 125 MAX DD2 evo Installation Instructions And Operators Manual

FITTING OF THE SPARK PLUG

The engine will be supplied with a spark plug.
Tools required:
• Feeler gauge
• Socket 21 mm
• Torque wrench
Procedure
Step
1 Remove the transport plug from the
cylinder head.
2
Check electrode gap of spark plug. Ad-
just as required.
NOTE
Check technical regulations to assure conform-
ity when setting the electrode gap.
Step Procedure
3 Fit supplied spark plug (pos. 1) and
tighten 25 Nm (221 lbf in) to 27 Nm
(239 lbf in).
4 Install the spark plug connector (pos.
2), ensure correct engagement.
Effectivity: 125 MAX DD2 evo
BRP-Rotax
INSTALLATION MANUAL
Figure 7.2
1
Spark plug 2 Spark plug connector
6
Page 3
Edition: September 01 2019