Rotax 125 MAX DD2 evo Installation Instructions And Operators Manual page 50

Figure 7.5
Hose package
1
Step Procedure
4 Attach the fuel line of the hose pack-
age (pos. 1) to the impulse nipple on
the engine housing..
NOTE
Check that valve is not the lowest point of the
impulse circuit to prevent that condensation af-
fects a proper operation.
Figure 7.6
Hose package
1
Effectivity: 125 MAX DD2 evo
BRP-Rotax
INSTALLATION MANUAL
Step
Figure 7.7
1
Step
Do not tighten cable ties too tight, because
constricted lines can lead to loss of function.
Step
Procedure
5 Attach cable tie with mount (pos. 1) to
the housing.
2
Cable tie
Procedure
6 Secure both lines with cable tie, ensur-
ing that the black hose is on top.
ATTENTION
Procedure
7 Attach an additional cable tie (pos. 3)
as shown in figure.
Impulse nipple
6
Page 5
Edition: September 01 2019