Rotax 125 MAX DD2 evo Installation Instructions And Operators Manual page 34

Figure 4.14
Tie wrap
1
Step Procedure
8 Connect pick up connector to pick up
sensor (pos. 1). Pay attention to the
engagement of the connector. See al-
so section: Direct attachment of the
engine to chassis.
Figure 4.15
Pick up sensor
1
NOTE
If it's not possible to plug in the connector of the
pick-up sensor, unscrew the pick-up sensor and
change the angle or direction. See also section:
Direct attachment of the engine to chassis.
Effectivity: 125 MAX DD2 evo
BRP-Rotax
INSTALLATION MANUAL
Step Procedure
9 Attach ignition cables to the spark
plug.
Edition: September 01 2019
3
Page 9