Assembly Of Paddle Shift System - Rotax 125 MAX DD2 evo Installation Instructions And Operators Manual

ASSEMBLY OF PADDLE SHIFT
SYSTEM
Tools required:
• Allen key 6 mm
• Allen key 5 mm
Step Procedure
1 Install spacer (pos. 1) into the appro-
priate bore (pos. 2) of the engine
housing.
Figure 7.10
Spacer
1
Step Procedure
2 Install washer (pos. 1) on one of the
two Bowden cables (pos. 2).
Effectivity: 125 MAX DD2 evo
BRP-Rotax
INSTALLATION MANUAL
2 Appropriate bore
Figure 7.11
1 Washer
Step Procedure
3 Mount Bowden cable (pos. 2) with
washer (pos. 1) onto the shift contact
guidance (pos. 3).
Figure 7.12
1 Washer
Shift contact
3
guidance
Step Procedure
4 Mount Bowden cable with shift contact
guidance (pos. 1) to the retaining plate
(pos. 2).
2
Bowden cable
2
Bowden cable
Page 7
Edition: September 01 2019
6