Rotax 125 MAX DD2 evo Installation Instructions And Operators Manual page 108

Figure 4.4: Ground wire
Variant 2: Additional cable on starter relay
A:
See
The additional cable is NOT attached to the ground wire. The control of the exhaust valve
timing is activated at 9100 rpm.
NOTE
Isolate the additional cable with an electrical/insulating tape to the ground wire so
that a possible contact with the engine ground does not affect the function.
B:
See
The additional cable is attached to the ground wire. The control of the exhaust valve timing
is activated at 8800 rpm.
Effectivity: 125 MAX DD2 evo
BRP-Rotax
Operators Manual
Cable on starter relay.
Cable on starter relay.
4
Page 7
Edition: September 01 2019