Rotax 125 MAX DD2 evo Installation Instructions And Operators Manual page 24

m WARNING
Non-compliance can result in serious injuries
or death!
The carburetor Bowden cable must not be kinked
or restricted as the carburetor piston might get
stuck in full throttle position.
Step Procedure
11 Set and secure the adjustment screw
for Bowden cable on chassis so that
the carburetor piston will remain in
closed position when throttle pedal is
not activated.
12 Set and secure the stop screw for
throttle pedal so that, with pedal com-
pletely pressed down, the carburetor
piston will be in the full open position.
The Bowden cable must not be under
full tension when the throttle is in fully
open position.
Effectivity: 125 MAX DD2 evo
BRP-Rotax
INSTALLATION MANUAL
2
Page 5
Edition: September 01 2019