NOTE
For draining the oil from the gear case, remove
the magnetic oil drain plug (pos. 1) and sealing
ring (pos. 2). Clean the oil drain plug before in-
stallation. Always use a new sealing ring.
Figure 8.3
Magnetic oil drain
1
plug
NOTE
Tighten magnetic oil drain plug (pos. 1) to 20
Nm (177 lbf.in.).
m WARNING
Non-compliance can result in serious injuries
or death!
Do not run the engine without gear oil. This will
lead to engine failure.
Effectivity: 125 MAX DD2 evo
BRP-Rotax
INSTALLATION MANUAL
2
Sealing ring
7
Page 3
Edition: September 01 2019