Table of Contents
Advertisement
Figure 50. Removing the low profile right riser
Next step
Install the expansion card riser. For more information, see
Installing the expansion card risers
Prerequisites
1
Follow the safety guidelines listed in
2
If removed, install the expansion cards into the expansion card risers. For more information, see
expansion card riser
Steps
1
Holding the touch points, align the expansion card riser with the connector and the riser guide pin on the system board.
2
Lower the expansion card riser into place until the expansion card riser connector is fully seated in the connector.
Figure 51. Installing the low profile left riser
Installing the expansion card
Safety
instructions.
risers.
Installing an expansion card into the
Installing and removing system components
91
Advertisement
Table of Contents
