Table of Contents
Advertisement
Next steps
1.
Replace the expansion card
Installing the expansion card risers
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. If removed,
install the expansion cards into the expansion card
Steps
1. Holding the edges or the touch points, align the holes on the expansion card riser with the guides on the system board.
2. Lower the expansion card riser into place and press the touch points until the expansion card riser connector is fully seated
on the system board connector.
Figure 80. Installing the expansion card riser (Riser 1)
riser.
Safety instructions
Before working inside your system
on page 25.
on page 26.
risers.
Installing and removing system components
87
Advertisement
Table of Contents
