Installation - Festo EXCM-30 Instructions Manual

Planar surface gantry

Hide thumbs Also See for EXCM-30:

Table of Contents

Mounting

4.3

Installation

Note

If there are temperature differences between the product and the mounting surface:

• Adapt the temperature of the product to the temperature of the mounting surface.

Observe the permissible ambient temperatures

(è A.5 Operating and storage conditions).

Note

The planar surface gantry is delivered from factory with a backlash-free setting.

• When mounting the planar surface gantry make sure that it is not distorted, because

if it is, it can change this setting.

• Follow the subsequently described procedure for attachment of the planar surface

gantry to avoid tension.

Caution

Inappropriate mounting material can cause the planar surface gantry to loosen and fall

down if the mounting position is not horizontal, which can result in injuries.

• Make sure that the mounting material used (socket head screws of the profile

mountings) ensures sufficient strength in combination with the mounting surface.

If mounting kits are covered by the Y-axis (traverse), this can be moved manually. To do

this, remove the motors (è 4.4.1 Mounting/dismantling motor) or release the holding

brake.

Festo – EXCM-30-EN – 1605b – English

Table of Contents