4.11 Default parameters
Select: SETTING MENU /
Default
Select:
YES: the default data
will be improved.
NO: the system cancels
the RUN command.
Select:
YES: exit without
perform any other
operation.
NO: the system
remains in Default
page.
4-64
The screen PATIENT DATA / Default allows the User to restore the
Default parameters (Factory set).
Restoring "Factory set " means to set once again the Default parameters
of the lung ventilator (MENU, SETUP, PRP, ALARMS limits).
Lung ventilator in Stand-by mode.
Enable: Setting & Ventilation Default
User manual, DU3104101