Preparation For Use - Siare Falco 202 Evo User Manual

3

PREPARATION FOR USE

In the first section of this chapter explains the main installation phases of Falco 202 Evo
(10.4") lung ventilator. In the second section highlights the preliminary checks to be carried
out before using Falco 202 Evo (hereinafter called lung ventilator).
Falco 202 Evo
CAUTION
If this is the first time you install the Falco 202 Evo, please read this User
manual carefully.
Please clean the lung ventilator and sterilise its components before use;
use the maintenance instructions herein and follow the applicable norms in
the country where the device is used.
UNPACKING

Unpack the device properly.
Please keep the original packaging, in order to avoid any damage to the
ventilator in case it shall be returned to the manufacturer.
TRANSPORT – Changing the lung ventilator's location
Move the lung ventilator using the suitable handle. Place the lung ventilator
on a flat surface or on any hardware provided. Make sure that the lung
ventilator cannot move accidentally during operation.
WARNING !! Personal injury - physical hazard

If handled incorrectly, the lung ventilator might tip over causing physical
personal injuries to patients and/or Users.

Place the lung ventilator on a flat surface. If the lung ventilator is not
suitably placed, it might move accidentally during operation.
WARNING !! Patient / clinician injury hazard

The device and all its accessories should be mounted and connected
by highly qualified technical staff, suitably trained and authorised by
SIARE.

Do not connect or disconnect parts or components of the lung ventilator
when it is on or powered.

Before using lung ventilator, carry out all necessary preliminary checks.
3-1