Ventilator Switch On / Self Test Phase - Siare Falco 202 Evo User Manual

4.1

Ventilator switch ON / Self Test phase


Set the main switch (placed on the back of the ventilator) to "I".

Make sure that on the lung ventilator keyboard
(commands area) the green led (that indicates the
presence of mains power supply) is on.

Hold the ON-OFF key for few seconds; the lung ventilator switches ON and the
automatic Self Test phase starts.
During Self Test phase, the lung ventilator software carries out the self-
diagnostic tests and checks a series of devices necessary for safe operation
of the lung ventilator /patient.
4-2
Self Test phase. Please close the
patient circuit
The Self Test phase in progress.

For more information on the
Self Test please refer to chap.
3.3.2.
The Self Test phase completed
successfully.

Press OK to begin

Press Cancel for other tests
User manual, DU3104101