Turbine Characterization - Siare Falco 202 Evo User Manual

4.16.3 Turbine characterization

The turbine characterization calibration is necessary in the following cases.
 When you notice differences out of tolerance (more than 2% of the end of the scale +
8% of the measured value) on the airways pressure values between the set and
measured values.
 Software update or first turning-on after an important repairing (for ex. turbine
replacement or inspiratory flow sensor replacement).

Select the function (or select and press by
the encoder knob).

The Turbine Calibration page is displayed.
In order to start the turbine characterization calibration program is
necessary the intervention of qualified SIARE personnel or qualified technical
personnel authorized by SIARE.
Falco 202 Evo
The turbine characterization program starts.
Selecting 'Cancel' you quit the Turbine.
Characterization Program and the system goes back
to the 'Calibration Programs' visualization.
4-71