Use Of Antibacterial Filters - Siare Falco 202 Evo User Manual

3.2.6 Use of antibacterial filters

Apply the antibacterial filters to the patient circuit.
For more information, please see documentation attached to the product.
3-10

Moisture loss

Calculated moisture return

Resistance at 30L/min

Resistance at 60L/min

Compressible volume

Weight

Connectors
WARNING !! Patient injury hazard
To protect the patient from any dust and particles, you must install a filter
between the inspiratory tube of the respiratory circuit and the patient.
WARNING !! Patient injury hazard
Replace the antibacterial filters as indicated in the maintenance
instructions (please, see on cap. 6).
WARNING !! Patient injury hazard

Please perform the "SELF TEST" phase every time you replace the
patient circuit.

The system will check the patient circuit every time you turn on the lung
ventilator.
WARNING !! Strangulation hazard

Pay utmost attention when connecting the patient to the lung ventilator.

If not carefully placed, the tubes, cables, the patient circuit and other
similar components installed on the lung ventilator might put the patient
at risk.
WARNING !! Burns hazard
Do not use conductive masks or respiratory tubes during surgery with
electrosurgical unit: they might cause burns.
6.7 mg H O/l
2
31.6mg H 0/l
2
0.2 cm H 0
2
0.8 cm H 0
2
59 ml
31 g
22F/15M - 22M/15F
User manual, DU3104101