Other Functions; Reset To Zero The "Partial Operating Hours - Siare Falco 202 Evo User Manual

4.18 Other functions

4.18.1 Reset to ZERO the "Partial operating hours "

The zeroing of the partial operating hours can be performed both in the
page of turbine characterization, and in the expiratory flow sensors
calibration page. As an example, the Expiratory Flow Sensors Calibration
displaying is used.
WARNING !! Risk of DM failure and/or injuries for the patient


Falco 202 Evo
Refer directly to SERVICE Manual.
Contact SIARE or a Centre authorized by SIARE.

Select the function (or select
and press by the encoder
knob).

The Expiratory Flow Sensors
Calibration page is displayed.

To continue, see the note
(ATTENTION) below.
4-81