Locate The System Serial Number In The Software - Quantum F2000 User Manual

Figure 50 Pull-Out Tab
Extended From Chassis
Showing System Serial
Number.
Locate the System
Serial Number in the
Software
Quantum F2000 User's Guide
You can locate the system serial number in the software by accessing
the Quantum Cloud Storage Platform TUI using an SSH tool, such as
PuTTY.
To locate the system serial number in the software:
1 Use PuTTY, or similar tool, to open an SSH connection to a canister
using the canister's management IP address.
2 Log in to the Quantum Cloud Storage Platform TUI using the root
username and password.
Note: The default root password is "esos". This password should
have been changed during the installation of the F2000.
The Quantum Cloud Storage Platform TUI screen appears (see
Figure 51 on page 64).
Chapter 3: F2000 Basic Operations
Locate the System Serial Number
63