Chapter 4: F2000 Customer Replaceable Units (CRUs)
Fan Module Replacement
Figure 108 Canister Cover Lock
Button Locations
112
4 Install the canister into the chassis:
a From the rear of the chassis, line up the canister with the empty
canister slot. Make sure that the canister is oriented correctly.
Note: The top canister is inverted and installed with the top cover
facing toward the bottom of the chassis. The bottom
canister is installed with the top cover facing the top of the
chassis.
b Carefully slide the canister into the slot with both latch handles
in the open position until the latch handles begin to engage
(see
Figure 109
handles at this time.
on page 113). DO NOT engage the latch
Quantum F2000 User's Guide