Quantum F2000 User Manual page 171

Figure 166 Rail Unlatched
(Right Side)
Quantum F2000 User's Guide
Remove the Old Rack Rails and Install the New Rack Rails
To remove the old rack rails:
1 Locate the black screws that are installed on the rear rail
connections.
2 Remove the screws from rails using a #1 Phillips screwdriver.
3 Open the front latch by pulling the tab and rotating the latch open
until it is at 90 degrees (see
Chapter 4: F2000 Customer Replaceable Units (CRUs)
Figure 166).
Rack Rails Replacement
157