Quantum F2000 User Manual page 95

Figure 70 Removing the PIB
Canister
Quantum F2000 User's Guide
b Grasp the gray tab firmly and carefully pull the PIB canister until
the card edge comes out of the midplane (see
c Pull the PIB canister clear of the chassis and set aside.
d Repeat
Step a
3 Install the PIB canisters into the new chassis:
a Line up the PIB canister with the chassis PIB canister guide.
Chapter 4: F2000 Customer Replaceable Units (CRUs)
through Step c to remove the other PIB canister.
Chassis Replacement
Figure 70).
81