Quantum F2000 User Manual page 90

Chapter 4: F2000 Customer Replaceable Units (CRUs)
Chassis Replacement
Figure 63 Port 4 Canister-to-
Canister Connection
Figure 64 Quantum F2000
Bezel
76
6 If the system contains 32 Gb FC cards, disconnect the FC cables from
the FC ports in PCIe slot 1 and PCIe slot 3 on the top canister and
PCIe slot 1 and PCIe slot 3 on the bottom canister (see
page 75). Label the cables so you know how to reconnect them later
in this process.
7 Disconnect the short CAT6A Ethernet cable that connects Port 4 on
the top canister to port 4 on the bottom canister (see
Label the cable so you know how to reconnect it later in the
process.
Item
1 Port 4 on the bottom canister
2 Port 4 on the top canister
8 Disconnect your the CAT6A Ethernet cable from the IPMI/BMC port
on a canister, if necessary.
9 Go to the front of the system and remove the front bezel by pulling
it away from the system (see
Description
Figure 64).
Quantum F2000 User's Guide
Figure 62 on
Figure 63).