Quantum F2000 User Manual page 150

Chapter 4: F2000 Customer Replaceable Units (CRUs)
PIB Canister Replacement
Figure 139 Removing the PSU
(PSU A Shown in Example)
Figure 140 Removing the PIB
Canister
136
b Remove the PSU by pulling on the PSU handle until it is clear of
the PSU bay (see
3 Remove the PIB Canister:
a Locate the gray tab just below the location of the removed PSU.
b Grasp the gray tab firmly and carefully pull the PIB Canister until
the card edge comes out of the midplane (see
c Pull the PIB canister out from the chassis.
Figure 139).
Quantum F2000 User's Guide
Figure 140).