Quantum F2000 User Manual page 173

Figure 169 Rail Unlatched
(Right Side)
Quantum F2000 User's Guide
6 Pull the rear rail connection free of the rack posts.
7 Repeat the previous procedure to remove the remaining rail.
8 Locate the new rack rails and identify the right rack rail.
9 Open the front and rear latches of the rack rails by pulling the tab
and rotating the latch open until it is at 90 degrees or greater (see
Figure 169).
10 Identify the right rail, and line up the rail on the bottom 1U of the
installation location.
11 Place rear pins of the rail into rear rack post.
Chapter 4: F2000 Customer Replaceable Units (CRUs)
Rack Rails Replacement
159