Chapter 4: F2000 Customer Replaceable Units (CRUs)
Interface Card Replacement
Figure 120 Port 4 Canister-to-
Canister Connection
122
Item
2
Top canister PCIe slot locations
9 If the system contains 32 Gb FC cards, disconnect the FC cables from
the FC ports in PCIe slot 1 and PCIe slot 3 on the canister that
contains the failed fan module (see
you know how to reconnect them later in this process.
10 Disconnect the short CAT6A Ethernet cable that connects Port 4 on
the top canister to port 4 on the bottom canister (see
Label the cable so you know how to reconnect it later in the
process.
Item
1
Port 4 on the bottom canister
2
Port 4 on the top canister
11 Disconnect the CAT6A Ethernet cable from the IPMI/BMC port on a
canister, if necessary.
12 Unlatch the canister by pulling both of the handles out from the
chassis (see
Figure 121
Description
Figure
120). Label the cables so
Description
on page 123).
Quantum F2000 User's Guide
Figure
120).