Figure 65 Black Screws
Front of the Chassis
Quantum F2000 User's Guide
Remove the Failed Chassis from the Rack
To remove the failed chassis:
1 Locate the black screws that are installed below the thumbscrews
on the front of the chassis. There is one screw on each side of the
chassis.
2 Remove screws from the Rails using a #1 Phillips screwdriver (see
Figure
on the
3 Locate the thumbscrews on both sides of the chassis.
Chapter 4: F2000 Customer Replaceable Units (CRUs)
65).
Chassis Replacement
77