Quantum F2000 User Manual page 99

Figure 75 SSD Assembly
Installation (Example SSD in
Slot 01)
Figure 76 Drive Carrier Handle
(Example SSD in Slot 01)
Quantum F2000 User's Guide
Chapter 4: F2000 Customer Replaceable Units (CRUs)
c Slowly insert the drive assembly into the same drive slot number
in the new chassis using the drive carrier release until the drive
release engages (see
d Seat the drive by pressing the drive carrier handle into the drive
carrier. This will allow the drive to make the connection with the
connector on the drive board without causing damage (see
Figure 76).
Figure 75).
Chassis Replacement
85