Quantum F2000 User Manual page 165

Figure 156 IPMI/BMC Port
Location on the Top Canister
Quantum F2000 User's Guide
Item LED
2 Canister
Fault
6 Disconnect the Ethernet cable from the IPMI/BMC port on the
canister.
7 Connect the Ethernet cable to the IPMI/BMC port on the bottom
canister (see Figure
Item
1 IPMI/BMC port on the bottom canister
8 Repeat Step 2 on page 148 through
off the bottom canister.
Disconnect the Cables from the System
To disconnect the cables:
1 At the rear of the system, locate PSU A and PSU B receptacles (see
Figure 157 on page 152).
Chapter 4: F2000 Customer Replaceable Units (CRUs)
Action
Amber solid: Fault conditions in canister
exist
156).
Description
Step 6
Rack Rails Replacement
on page 151 to power
151