Figure 192 Drive Installation
Figure 193 Drive Carrier
Handle
Quantum F2000 User's Guide
2 Orient the SSD assembly so the drive carrier latch release button is
on top. Then slowly slide the drive into the open drive slot using the
drive carrier release until the drive release engages (see
3 Seat the drive by pressing the drive carrier handle into the drive
carrier (see
Figure 193
make the connection with the connector on the drive board without
causing damage.
Chapter 4: F2000 Customer Replaceable Units (CRUs)
on page 179). This will allow the drive to
SSD Assembly Replacement
Figure
192).
179