Quantum F2000 User Manual page 138

Chapter 4: F2000 Customer Replaceable Units (CRUs)
Interface Card Replacement
Figure 123 Canister Cover Lock
Button Locations
124
Note: If you are removing the bottom canister, note that this
canister is inverted. You must turn the canister over to
access the canister cover.
a Unlock the canister cover by pressing the two lock buttons and
slide the cover towards the rear of the canister (see
on page 124).
b Remove the cover by lifting the cover off of the canister.
15 Locate the PCIe bracket that contains the failed interface card.
16 If you are installing an FC card, remove the SFPs from the FC ports
and set them aside (see Figure 124 on page 125).
Quantum F2000 User's Guide
Figure 123