Quantum F2000 User Manual page 93

Figure 68 PSU Release Latch
Quantum F2000 User's Guide
Locate the New Chassis
1 Locate the new chassis and unpack it from the box, if necessary.
2 Place the new chassis on an ESD-protected surface next to the failed
chassis.
In the next procedure, you will move components from the failed
chassis to the new chassis.
Remove Components from the Failed Chassis and Install them
into the New Chassis
To remove components from the failed chassis and install in the new
chassis:
1 Remove the PSUs from the failed chassis:
a Unlock the PSU by pressing down on the PSU release latch (see
Figure 68).
Chapter 4: F2000 Customer Replaceable Units (CRUs)
Chassis Replacement
79