Quantum F2000 User Manual page 144

Chapter 4: F2000 Customer Replaceable Units (CRUs)
Interface Card Replacement
Figure 131 Canister Cover Lock
Button Locations
130
b Verify the lock buttons on the cover have engaged and the
cover is secure.
6 Install the canister into the chassis:
a From the rear of the chassis, line up the canister with the empty
canister slot. Make sure that the canister is oriented correctly.
Note: The bottom canister is inverted and installed with the
top cover facing toward the bottom of the chassis. The
top canister is installed with the top cover facing the
top of the chassis.
b Carefully slide the canister into the slot with both latch handles
in the open position until the latch handles begin to engage
(see Figure 132
handles at this time.
on page 131). DO NOT engage the latch
Quantum F2000 User's Guide