Quantum F2000 User Manual page 129

L
Figure 113 atching the
Canister (Bottom Canister
Example)
Quantum F2000 User's Guide
Item
1 Bottom canister PCIe slot locations.
2 Top canister PCIe slot locations.
8 If the system contains 32 Gb FC cards, connect the FC cables to the
FC ports in PCIe slot 1 and PCIe slot 3 on the top canister and the
bottom canister (see
9 Rotate the latch handles into the canister until the are fully engaged
(see Figure 113). This applies power to the system. The canister will
power itself on about 20 seconds after it is connected to power.
10 Verify the fan module is functioning properly:
a Once the canister is physically powered-on, from a notebook
computer, access the BMC Web UI and log in.
Note: Refer to
Chapter 3, F2000 Basic
b In the BMC Web UI, click Sensor.
c Verify that the fan module fans show a State of Normal (see
Figure 114 on page 116).
Chapter 4: F2000 Customer Replaceable Units (CRUs)
Description
Figure 112 on page 114).
Access the BMC Web UI
Operations.
Fan Module Replacement
on page 30 in
115