Quantum F2000 User Manual page 98

Chapter 4: F2000 Customer Replaceable Units (CRUs)
Chassis Replacement
Figure 73 Drive Carrier Handle
(Example SSD in Slot 01)
Figure 74 Remove Drive
(Example SSD in Slot 01)
84
5 Remove the SSD assemblies from the failed chassis and install them
into the new chassis.
a Release the drive assembly by pressing the latch release button
on the drive carrier and lowering the drive carrier handle until it
stops (see Figure
b Pull the drive assembly out of the drive slot in the failed chassis
using the drive carrier handle (see
73).
Figure
Quantum F2000 User's Guide
74).