Quantum F2000 User Manual page 59

Figure 32 F2000 Rear -
Canister Locations
Quantum F2000 User's Guide
Item
1 Bottom canister
2 Top canister
4 Under Host is currently off, select Power On to power on the
canister.
Note: Do not use the Power Cycle, Hard Reset, or ACPI
Shutdown options. In addition, do not use any of the
options under Peer canister Host is currently on section.
5 Click Perform Action.
The system displays a dialog window with the message "Are you
sure to perform this operation?
6 Click OK.
The system then displays the following message on the page:
"Performing Power Action... Please wait"
The Fault LED on the front of the system and on the rear of the
canister turns off and the Power LED on the front of the system and
on the rear of the canister display solid green (see
page 46).
Chapter 3: F2000 Basic Operations
Power On a Canister
Description
Figure 33 on
45