Quantum F2000 User Manual page 168

Chapter 4: F2000 Customer Replaceable Units (CRUs)
Rack Rails Replacement
Figure 161 Port 4 Canister-to-
Canister Connection
154
Item
2 Top canister PCIe slot locations.
6 If the system contains 32 Gb FC cards, disconnect the FC cables from
the FC ports in PCIe slot 1 and PCIe slot 3 on the top canister and
PCIe slot 1 and PCIe slot 3 on the bottom canister (see
page 153). Label the cables so you know how to reconnect them
later in this process.
7 Disconnect the short CAT6A Ethernet cable that connects Port 4 on
the top canister to port 4 on the bottom canister (see
Label the cable so you know how to reconnect it later in the
process.
Item
1 Port 4 on the bottom canister
2 Port 4 on the top canister
8 Disconnect the CAT6A Ethernet cable from the IPMI/BMC port on a
canister, if necessary.
9 Go to the front of the system and remove the front bezel by pulling
it away from the system and set it aside (see
page 155).
Description
Description
Figure 162
Quantum F2000 User's Guide
Figure 160 on
Figure 161).
on