Quantum F2000 User Manual page 181

Figure 179 PSU Locations at
the Rear of the System
Quantum F2000 User's Guide
Note: Quantum recommends connecting each power cord to a
separate AC circuit to ensure system availability in case of a
power failure.
The system will automatically start up about 20 seconds after power
is applied. It will take a few minutes for the system to completely
start up.
Item
1 Power supply unit (PSU) A
2 Power supply unit (PSU) B
6 Loop the retention clips around the power cables and pinch them
until the clips catch and lock in place (see
Chapter 4: F2000 Customer Replaceable Units (CRUs)
Description
Rack Rails Replacement
Figure 180 on page 168).
167