Chapter 4: F2000 Customer Replaceable Units (CRUs)
Chassis Replacement
Figure 59 PSU Receptacle
Locations at the Rear of the
System
Figure 60 Cable Retention
Clips
74
Item
1
Power supply unit (PSU) A
2
Power supply unit (PSU) B
2 Detach the cable retention clips from the power cables on PSU A
and PSU B (see
Figure
3 Remove the power cables by pulling them out of the PSU
receptacles. Do not jerk the cables.
4 Disconnect the CAT6A Ethernet cables from Port 1 on the top
canister and the bottom canister (see
the cables so you know how to reconnect them later in this process.
Description
60).
Figure 61
Quantum F2000 User's Guide
on page 75). Label