Quantum F2000 User Manual page 55

Figure 29 F2000 Rear -
Canister Locations
Quantum F2000 User's Guide
Item
1 Bottom canister
2 Top canister
4 Under Host is currently on, select Power Off to power off the
canister.
Note: Do not use the Power Cycle, Hard Reset, or ACPI
Shutdown options. In addition, do not use any of the
options under Peer canister Host is currently on section.
5 Click Perform Action.
The system displays a dialog window with the message: "Are you
sure to perform this operation?"
6 Click OK.
The system then displays the following message on the page:
"Performing Power Action... Please wait"
The Fault LED on the front of the system and on the rear of the
canister turns on solid amber when the canister is powered off (see
Figure 30 on page 42).
Chapter 3: F2000 Basic Operations
Power Off a Canister/System
Description
41