Quantum F2000 User Manual page 157

Figure 146 Cable Retention
Clip
Figure 147 PSU Release Latch
Quantum F2000 User's Guide
b Remove the power cord by pulling firmly, but do not jerk it out
of the unit.
2 Remove the PSU from the chassis.
a Unlock the PSU by pressing down on the PSU release latch (see
Figure 147).
b Remove the PSU by pulling on the PSU handle until it is clear of
the PSU bay (see
Note: Do not pull on the gray PIB canister tab. The PIB
canister should not be removed from the chassis unless
it has been identified as a failed part.
Chapter 4: F2000 Customer Replaceable Units (CRUs)
Figure 148 on page 144).
PSU Replacement
143