Session 4: Selecting Processes; Figure 3-13 Data File Loaded - Data I/O UniSite-xpi User Manual

Figure 3-12
Choosing a Translation Format
Figure 3-13
Data File Loaded

Session 4: Selecting Processes

UniSite-xpi User Manual
Click OK.
When the data file is successfully loaded into programmer RAM, a
message box displays the RAM checksum.
Click OK.
Note: Because TaskLink for Windows is running in Simulation Mode, the
checksum displayed is 00000000. When connected to a programmer and
loading real data, the checksum will display actual values.
After loading data into programmer RAM, the next step is determining
which processes the programmer will perform on the device.
3. Getting Started
3-9