Data I/O UniSite-xpi User Manual page 185

Update
UniSite-xpi User Manual
3. When the Custom Menu is displayed, in the Delete field enter the
number corresponding to the file you want to delete, then move the
cursor to the Are you sure? field and press Y.
CAUTION: If you do not want to delete the file, do not press E
4. To delete the file, press E
when you are done deleting devices, press F2 to return to the Custom
Menu Algs menu.
This command displays the Update screen, which allows you to update
the algorithms in a Custom Menu to the current version of the
algorithms.
More Configure
Com- System
mands
To update algorithms from a Custom Menu, follow these steps:
1. Select the Update command.
2. Set the following fields using the arrow keys to move from field to
field and press S
PACE
Algorithm media
(F, M)
Add/Create
New Custom Menu
algorithm disk
Old Custom Menu
algorithm disk
Note: The algorithm source is always D (default) for an Update operation.
3. Insert the disk that contains your old Custom Menu and press E
to continue. Follow the directions on the screen (inserting disks if
prompted).
4. To update the Custom Menu, press E
update the Custom Menu, press F2).
When you are done updating Custom Menus, press F2 to return to
the Custom Menu Algs menu.
. If you do not want to delete the file, or
NTER
Custom
Menu Algs
to toggle a selected field:
Select F if your current algorithm files are
located on floppy disks. Select M if your
current algorithm files are located on an
MSM (Mass Storage Module).
Legacy: This field appears only if an MSM
is installed.)
Select C (Create) to create a new Custom
Menu disk and place the updated version
of your old Custom Menu on the new disk.
Select the drive letter that will contain your
updated Custom Menu.
Select the drive letter that will contain you
old Custom Menu.
(if you do not want to
NTER
4. Commands
.
NTER
Update
(Note for
NTER
4-51