Data I/O UniSite-xpi User Manual page 256

6. Translation Formats
LOF Fields
6-18
The following fields are included in Data I/O's implementation of the
LOF format:
<STX> *
C *
K
N *
QB
QC
QF
QM
QP *
QS
QV *
R
S
T
V *
X *
<ETX> *
* These fields are already defined as part of the JEDEC standard and will not be defined in
this section.
Start of Data (ASCII Ctrl-B, 0x02 hex)
Fuse Checksum
Fuse data, followed by control words and pulse
link cycles
Notes Field
Number of bits per word
Number of control words at the end of each K
field
Number of Fuses in Device (# of K fields)
Number of macro cells in the data file
Number of Device Package Pins
Number of Hex-ASCII words in each K field
and each control word
Maximum Number of Test Vectors
Signature Analysis (reserved for future use)
SpDE Checksum
Signature Analysis (reserved for future use)
Test Vectors (reserved for future use)
Default Test Conditions (reserved for future
use)
End of Data (ASCII Ctrl-C, 0x03 hex)
UniSite-xpi User Manual