Data I/O UniSite-xpi User Manual page 181

Create
UniSite-xpi User Manual
This command displays the Create screen. In the Create screen, you can
create a new Custom Menu by selecting the devices you wish to include
in the Custom Menu. The Create command also copies device-related
files to the new Custom Menu disk (the disk that will contain the Custom
Menu).
Configure
More
System
Com-
mands
To create a new Custom Menu, follow these steps:
1. Select Create. The programmer prompts you for
Source Disk
Algorithm Type (D,E,K)
Algorithm Media (F,M)
Destination Disk
Custom Menu Algorithm Disk
where (D, E, K) is default algorithms, extended algorithms, or Keep
Current algorithms, and (F, M) is floppy disk or Mass Storage
Module (MSM).
2. Select the algorithm media and algorithm source that matches the
first algorithm you wish to add to the Custom Menu. (You are not
limited by the algorithm source you choose. Your Custom Menu can
contain any combination of default, extended, and Keep Current
algorithms.) In the Custom Menu algorithm disk field, select the
disk drive where the Custom Menu algorithm files will be created.
3. If prompted, insert the Algorithm disk that contains the algorithms
from which you want to choose into the disk drive. (If you do not
have the correct disk inserted, the programmer will prompt you for
the disk to insert when necessary.)
4. Press E to continue. Follow the directions on the screen
NTER
(inserting disks if prompted).
CAUTION: This operation uses RAM as a temporary storage buffer and
alters the contents of RAM.
If you get the message
Need to clear user RAM file(s) prior to operation...
this means that the programmer does not have enough available
RAM to perform the operation. If you press E
are cleared and the operation continues. If you don't want RAM files
cleared, cancel the operation by pressing C
Custom
Menu Algs
—only appears if MSM is installed
NTER
+ Z.
TRL
4. Commands
Create
, the RAM file(s)
4-47