Download Print this page
Data I/O OPTIMA Getting Started Manual

Data I/O OPTIMA Getting Started Manual

Advertisement

Quick Links

Sprint OPTIMA
OPTIMA light
Congratulations on purchasing
your new Sprint OPTIMA or
OPTIMA light
The OPTIMA
and OPTIMA light
are desktop IC Programmers that can
accommodate various devices.
The serial number of the base is
located on the bottom of the unit.
The serial number of a TOP is located
inside its bottom edge (the TOP must
be removed to see it).
This guide describes:
• Parts included with the OPTIMA
• Assembly Instructions
• Installing a Device
• Sales and Technical Support
• System Requirements
• Operating Requirements
• Technical Specifications
and
For more information...
on your Sprint family programmer or
using the software, refer to documen-
tation on the "TaskLink for Win-
dows
" CD.
1

Advertisement

loading

Summary of Contents for Data I/O OPTIMA

  • Page 1   The OPTIMA and OPTIMA light on your Sprint family programmer or • Parts included with the OPTIMA are desktop IC Programmers that can using the software, refer to documen- • Assembly Instructions accommodate various devices. tation on the “TaskLink for Win- •...
  • Page 2 Note: Some parallel ports have hardware characteristics that may cause problems communicating with the programmer. If you see the message “Found slow printer port” during installation, install the OPTIMA Booster sup- plied with your programmer. Follow the instructions “Installing the OPTIMA Booster for a Slow Printer Port”...
  • Page 3 Replacing a TOP Note: OPTIMA programmers ship with the TOP already installed. However, you may wish to replace the TOP if you ordered an optional one. Caution: Ensure that the programmer power is off, and that the programming application is set to TOP Replacement (if available) or closed down.
  • Page 4 Germany Web site at http://www.dataio.de Data I/O has made every attempt to ensure that the information in this document is accurate and complete. Data I/O assumes no liability for errors, or for any incidental, consequential, indirect, or special damages, including, without limitation, loss of use, loss or alteration of data, delays, or lost profits or savings, arising from the use of this document or the product which it accompanies.

This manual is also suitable for:

Optima light