Intended Use - HAKO Scrubmaster B400 R Operating Manual

Hide thumbs Also See for Scrubmaster B400 R:
Table of Contents

Advertisement

Introduction

Intended use

In the basic variant B400 R, the Scrubmaster is just a scrubber-drier for the wet
cleaning of hard indoor floor surfaces. This machine is intended for commercial
use, e.g. in shopping centres, airports, industrial plants and warehouses. In the
variants B400 RM and B400 RH, the Scrubmaster also has a sweeping func-
tion for picking up dry and moist dirt. These two variants are additionally intend-
ed for use in multi-storey car parks, pedestrian zones and car parks, for
example. Any use extending beyond this is not intended use. The manufacturer
is not liable for any damage resulting from this; the operator alone bears the
risk. Intended use also includes compliance with the operating, maintenance
and repair conditions specified by the manufacturer in this operating manual.
The Scrubmaster B400 R may be used, maintained and repaired only by per-
sons who are familiar with this work and have been briefed and instructed
about the dangers. Repairs and maintenance work not described in this
operating manual may only be carried out by the specialists of a Hako service
workshop.
The relevant accident prevention regulations as well as the other generally rec-
ognised safety engineering and occupational medical rules must be complied
with.
By virtue of its design and construction as well as in the version distributed by
us, the machine meets the usual health and safety requirements of the EC
Directives (see Declaration of Conformity). This Declaration of Conformity los-
es its validity in the event of a modification to the machine not authorised by us.
The manufacturer is not deemed liable for any damage resulting from unau-
thorised modifications to the machine.
Notes on warranty
The terms defined in the purchase agreement apply. Claims for compensation
in relation to damage are excluded from the terms of the warranty when the
damage is the result of the failure to observe rules concerning servicing and
maintenance. Maintenance work must be carried out by a Hako service work-
shop and confirmed in the service booklet under the item “Maintenance Re-
port”. The service booklet serves as a warranty logbook.
The following are excluded from the terms of warranty: Natural wear and tear
through overuse, defective fuses, improper handling, misuse and unauthorised
modifications. Claims under the terms of the warranty are also annulled when
damage occurs to the machine resulting from the use of parts or accessories
not explicitly approved of by us or from failure to observe maintenance rules.
3
Scrubmaster B400 R (7190)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scrubmaster rmScrubmaster rh 7190

Table of Contents