General Principle Of Operation; Driving With The Delta Cleaning System - HAKO Scrubmaster B5 Operating Manual

Use
2.3

General principle of operation

In cleaning mode, the cleaning solution is supplied from the solution tank to
the cleaning tools. When the machine is moving forwards, the loosened dirt is
absorbed by the squeegee with the help of the cleaning solution and con-
veyed into the waste water tank.
2.3.1

Driving with the Delta Cleaning system

Due to the intensive movements of the cleaning tools, influenced by ECO
mode or no ECO mode, the machine guided by the operator glides over the
floor. The operator determines the driving speed and guides the machine in
the desired direction. Driving forwards and reversing as well as vacuuming are
possible, see Fig. 5.
Note
The pairing of cleaning tool (brush or pads) and floor, as well as ECO
mode or no ECO mode impacts the driving speed.
3
Fig. 5
22
6
1
5
4
2
1 Push close
to the
edge
2 Vacuum
backwards
3 U-turn
path-in-
path
4 Vacuum
corner
5 Clean
corner
6 Pull close
to the
edge
02-7150-00.fm