Cabling The Physical Service Processor (If Installed) - HPE 3PAR StoreServ 9000 Customer Self Install Manual

Figure 16: Redundant power configuration

Cabling the physical service processor (if installed)

The physical service processor is an optional component that can be used with the HPE 3PAR StoreServ
9000 Storage system instead of using a virtual service processor.
IMPORTANT: Do not turn on power to the components at this time. Connect the power cables and
keep the power off until you power on the components.
Procedure
1. Connect the cable for the management connection.
a. Connect an Ethernet cable between the Management port and the network using the same subnet
as the storage system.
b. At the rack rear, neatly route and secure the cables along the right side of the rack.
Figure 17: Physical service processor ports, HPE ProLiant DL120 Gen9 Server
Cabling the factory-integrated-in-rack option: Process overview 27